建筑门窗能开关自如,门与门框、门与地面之间、窗与窗框之间就必须有一定的缝隙。自然这些缝隙为每位业主带来了很多的困扰:噪音、冷空气、灰尘、雨水、火及烟气、气味、光线、蚊子、苍蝇昆虫等。不仅如此,这些缝隙还会极大地影响室内采暖和空调冷暖的效果,导致了大量的能源浪费和消耗。

   家居中,通过门窗缝隙损失的热量一般为12%,不夸张的说一扇普通的单扇门四周的缝隙加起来,相当于墙上有一块建筑砖大小的漏洞。解决以上问题的唯一方法,就是给门窗四周的缝隙穿上密封衣,当门窗处于关闭的状态时。所有的缝隙者能被封闭起来,既能阻挡室外的入侵物(昆虫,灰尘等)也能防止室内冷热气泄露。安装各种适合的门窗密封,既可以为门窗提供持续长久的门窗密封作用,又不会影响门窗的正常关闭。

随着国家对于节能减排的重视,和人们生活质量的提高,越来越多的人们开始重视门窗密封的作用与效果。

Building doors and windows can be opened and closed freely, and there must be certain gaps between the door and the door frame, between the door and the ground, and between the window and the window frame. Naturally, these gaps bring a lot of trouble to each owner: noise, cold air, dust, rain, fire and smoke, smell, light, mosquitoes, flies and insects. Not only that, these gaps will also greatly affect the effect of indoor heating and air conditioning, resulting in a lot of energy waste and consumption.

In the home, the heat loss through the gaps of doors and windows is generally 12%. It is no exaggeration to say that the gaps around an ordinary single door add up to a hole in the wall the size of a building brick. The only way to solve the above problems is to put a seal on the gaps around the doors and windows when the doors and windows are closed. All the gaps can be closed, which can not only block outdoor intrusions (insects, dust, etc.) but also prevent indoor hot and cold air from leaking. Installing a variety of suitable door and window seals can not only provide long-lasting door and window sealing for doors and windows, but also will not affect the normal closing of doors and windows.

With the country's emphasis on energy conservation and emission reduction, and the improvement of people's quality of life, more and more people have begun to pay attention to the role and effect of door and window sealing.

   门窗若想达到开关自如的状态,门与门框、门与地面之间、窗与窗框之间就必须有一定的缝隙。然而这些缝隙也给人们带来许多干扰,例如:噪音、火及烟气、雨水、冷、热风及灰尘、光线、昆虫及害虫。同时,这些缝隙也会影响室内采暖和空调的效果,造成大量的能源损耗。这样的就需要在门窗的四周安装最合适的密封系统，当门窗关闭时,所有的缝隙都被密封起来,密封产品往往是多功能的,即能阻挡室外的入侵物,也能防止室内的冷、热气泄漏。

   安装适合的密封件可以为各种门窗提供全面的,持续的密封作用,同时又不会影响门窗的正常关闭。因此在不同的环境下,选择最为适合的材质密封条变得尤为重要。

   判断密封条是否能满足您的要求,产品的性能是最关键的一点,当然这取决于密封条应用的地方对密封条使用寿命、颜色、环保、防尘、隔音等的影响。但是不论什么场合下使用的密封条,都不应该过早出现裂纹、变色、褪色、断裂、有深色液体析出、污染门窗的现象,这些现象都与制造商在PVC树脂的选择,增塑剂质量的好坏,填充料CACO3,矿物质含量的多与少,配方中是否含有紫外线吸收剂和抗氧化剂都有重要关系,任何一个负责任的制造商都不应该将低劣的产品投入市场。

If the doors and windows want to open and close freely, there must be a certain gap between the door and the door frame, between the door and the ground, and between the window and the window frame. However, these gaps also bring many disturbances to people, such as: noise, fire and smoke, rain, cold, hot air and dust, light, insects and pests. At the same time, these gaps will also affect the effect of indoor heating and air conditioning, resulting in a lot of energy loss. In this way, it is necessary to install the most suitable sealing system around the doors and windows. When the doors and windows are closed, all the gaps are sealed. The sealing products are often multi-functional, which can block outdoor intruders and prevent indoor cold. , hot air leakage.

Installation of suitable seals can provide a comprehensive, continuous sealing action for various doors and windows without affecting the normal closing of doors and windows. Therefore, in different environments, it is particularly important to choose the most suitable material for sealing strips.

To judge whether the sealing strip can meet your requirements, the performance of the product is the most critical point. Of course, it depends on the impact of the sealing strip application on the service life, color, environmental protection, dustproof, sound insulation, etc. of the sealing strip. However, no matter what occasion the sealing strip is used, there should be no premature cracks, discoloration, fading, breakage, dark liquid precipitation, or contamination of doors and windows. These phenomena are related to the manufacturer's choice of PVC resin, plasticizers Whether the quality is good or bad, the filler CACO3, the more or less mineral content, whether the formula contains UV absorbers and antioxidants all have important relationships, any responsible manufacturer should not put inferior products on the market.